background image

2

Ceiling Cassette-Type Air Conditioner

Ceiling Cassette- Type Air Conditioner Owner’s Manual

TABLE OF CONTENTS

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

Staple your receipt to this page in the event you need it

to prove date of purchase or for warranty issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.

You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips

first, you may not need to call for

service at all.

PRECAUTION

Contact the authorized service technician for repair or
maintenance of this unit.

• Contact the installer for installation of this unit.

• The air conditioner is not intended for use by young

children or invalids without supervision.

• Young children should be supervised to ensure that

they do not play with the air conditioner.

• When the power cord is to be replaced, replacement

work shall be performed by authorized personnel only
using only genuine replacement parts.

• Installation work must be performed in accordance

with the National Electric Code by qualified and
authorized personnel only.

A. Safety Precautions

.......................

3

B. Product Introduction

....................

6

1. Name and function of parts .......6
2. What to do before operation......6
3. Operation Indication Lamps ......7

B. Operating Instructions

.................

8

1. How to insert the Batteries ........8
2. Wireless Remote Controller 

Maintenance..............................8

3. Operating Method......................8
4. Wireless Remote Controller ......9

C. How to use the Mode Selection

Button

..........................................

10

1. Cooling Operation ...................10
2. Auto Operation  .......................11
3. Auto changeover operation

(Heat pump model only) ..........12

4. Healthy Dehumidification

Operation................................13

5. Heating Operation

(Heat pump model only) ..........14

6. Jet Cool Operation ..................15
7. NANO PLASMA Purification 

Operation (Optional)................16

8. 2nd F Operation ......................17
9. Additional features...................18
10. Setting the Central-Control 

Address .................................21

D. Maintenance and Service

..........

22

1. Indoor Unit...............................22
2. Purifying filter(Optional)...........23
3. Operation Tips!........................24
4. Troubleshooting Tips! Save 

time and money!.....................25

5. Call the service immediately 

in the following situations ........25

Summary of Contents for LTNC182QLE0




























Reviews: