Copyright ⓒ. 2014. All Rights Reserved.
9. RFx Information
The RF field strength of the wireless module or modules that may be
embedded in your TCU is well all international RF exposure limits as known
at this time. Because the wireless modules(which may be embedded into your
TCU) emit less energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these modules are safe for use.
Regardless of the power levels, care should be taken to minimize human
contact during normal operation. This module should be used more than 20cm(8
inches) from the body when wireless devices are on and transmitting.
This transmitter must not be collocated or operate in conjunction with any other
antenna or transmitter. Operation is subject to the following two conditions: (1)
this module may not cause interference , (2) this module must accept any
interference that may cause undesired operation.
10.1 Information for integrator
The integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user manual of the end
product. The user manual which is provided by integrators for end users must
include the following information in a prominent location. To comply with FCC RF
exposure compliance requirements, the antenna used for this transmitter must
be installed to provide a separation distance of at least 20cm from all persons
and must not be collocated or operating in conjunction with any other antenna or
transmitter. Label for end product must include contains FCC ID : YZP-VL1000
or A RF transmitter inside, FCC ID : YZP-VL1000
