- 22 -
7-2-4 Fill/Park Position
1. Once a normal harvest mode has been completed, the water solenoid will be activated.
2. The amount of water is adjusted by inserting a “pin” into small hole located at front of ice maker. These changes
the time allowed for fill as illustrated in the table below.
Water supply amount TABLE
STAGE
TIME TO SUPPLY
INDICATIONS
REMARKS
1
2
3
6 sec.
7 sec.
8 sec.
The water amount will vary depending
on the water control switch setting, as
well as the water pressure of the
connected water line.
NOTE :
Below is an example used by another vendor as an explanation of what is taking place.
NOTE:
The water mount only must be changed by technicians.
