LG LT-C548DLE2, Installation Manual

Page: 23 / 32

Installation
Installation Manual 23
Function Code
01:01
Value
1
Installer setting mode is to set the detail function of the remote controller.
If the installer setting mode is not set correctly, it can cause problems to the product, user
injury or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certificated person should be responsible for the
results. In this case, free service cannot be provided.
Installer Setting -PQRCUSA0
1. Press the button for 4 secsonds to
enter the installer setting mode. (When you
enter the setting mode initially, Function
code is displayed on the bottom of the
LCD screen.)
2. Repeat pressing the Function setting button,
the menu will change with the corresponding
function code
• Test Run
’
Address Setting
’
E.S.P. Value
’
Thermistor
’
Ceiling Height
’
Static Pressure
’
Group Setting
’
Override Setting
’
Dry
Contact
’
Release 3Min. Delay
’
Zone State
’
Convert Temp.
’
Plasma
’
Heater
’
Humidifier
’
Elevation Grill
’
Ventilation Kit
j
Some contents may not be displayed depending on the product function
j
Installer setting Code table
No. Function Code Value
1 Test Run 01 01:Set
2 Address Setting 02 00~FF : Address
Valu1
’
01:VeryLow/
3 E.S.P. Value 03
02:Low/03:Med/
04:High/05:Very
HighValue2
’
0~255
4 Thermistor 04
01:Remo, 02:Indoor,
03:2TH
5 Ceiling Height 05
01: Low/02:Standard
03:High/04:Super high
6 Static Pressure 06
01:V-H/02:F-H/
03:V-L/04:F-L
7 Group Setting 07 00:Slave/01:Master
8 Override Setting 08 00:Slave/01:Master
9 Dry Contact 09 00:Manual/01:Auto
No. Function Code Value
10 Release 3 Min. 10 01:Set
Delay
11 Zone State 11 01:Variable/02:Fixed
12 Convert Temp. 12 01:Celsius
02: Fahrenheit
13 Plasma 20
14 Heater 21
15 Humidifier 22
00: Not Installed/
16 Elevation Grill 23
01: Installed
17 Ventilation Kit 24
How to enter installer setting mode