LG LSWS300BD Service Manual Download Page 26

Page: 26 / 80

3-11

DISASSEMBLY INSTRUCTIONS

1. Remove the oven door from the oven.

(see page 3-11)

2. Place the oven door on a padded work surface

with the front glass facing down.

3. Remove the 4 top door screws.

4. Remove the three bottom screw from the door liner.

5. Lift the inner assembly off the front glass and set

it aside

6. To remove the door handle & trim.

a. Remove 2 screws for handle and replace.

b. Slide Door trim up and off.

7. To remove the hinge assembly :

1) Remove the 2 lower liner screws (see step 3)

2) Place the door liner assembly on a padded

work surface with the hinge over the edge.

3) Remove the two hinge hanger screws.

4) Remove the 8 screws.

REMOVING THE OVEN DOOR HANDLE & GLASS

CAUTION

• Be careful when you work on the

electric oven handling the sheet

metal part.

4 top liner screws

Hinge screws

Handle

screws

COVER_INNER-2

Door trim

Summary of Contents for LSWS300BD

















































































Search results

Summary of Contents for LSWS300BD

Reviews:

LG LSWS300BD, Service Manual, Page: 26 / 80

Search results

Summary of Contents for LSWS300BD

Reviews: