40
OPERATION
Setting Steam Function
Example: To steam cook at 375 °F
1
Touch
Steam Bake
or
Steam Roast
.
2
Touch
Steam Level
repeatedly until desired
steam level appears in the display: Low, Med, or
High.
3
Touch
Start
. The display shows 350 °F.
4
Set the oven temperature: touch
3
,
7
and
5
.
If desired, set the cook time and delayed start
time.
5
Touch
Start
. The display shows
Steam Bake
or
Steam Roast
and the oven temperature starting
at 100 °F.
6
Once cooking is finished, allow oven to cool
completely, then wipe up any water left on oven
interior.
Once Steam function is started, an indicator on the
display shows the status of the steam function. Make
sure the water tank is filled with water before starting
the Steam Bake or Steam Roast function. If the water
in the tank runs out during cooking, a chime sounds
and
Fill the water
shows in the display. The oven
continues to cook without steam.
NOTE
•
Remember to drain the water tank after use.
•
It is normal to hear the sound of boiling water
from the steam generator while running the
steam functions.
•
If mineral deposits remain on the oven bottom
after steam mode, use a cloth or sponge
soaked in vinegar or a weak citric acid solution
to remove them before using the steam mode
again. See the Maintenance section under
Descaling for more info. To remove stubborn
hard water scale, use the Descaling function.
•
Wipe away excess water left over after cooling.
•
To avoid damage and extent product life,
descale the steam feeder after every 10 hours
of use, or more often if needed.
•
After the steam mode is used for 8 hours, a
reminder to descale the product appears in
the display the next time the steam mode is
selected. You will not be able to use the steam
mode until the Descaling function is run. To
avoid this delay, run the Descaling function
after every 2-3 uses of the steam mode.
•
If the descaling reminder appears, touch
start
to run the Descaling function.
Warm
The WARM function maintains an oven temperature
of less than 230°F. This function should not be used
to reheat cold food. The Warm function keeps cooked
food warm for serving up to 3 hours after cooking has
finished.
After 3 hours the WARM function shuts the oven OFF
automatically.
Setting the Warm Function
1
Touch
More Mode
.
2
Touch
2
to select WARM.
3
Select the temperature level: touch
1
for high,
2
for medium, or
3
for low.
4
Touch
Start
to start warming.
5
Touch
Clear/Off
at any time to cancel.
NOTE
•
The Warm function is intended to keep food
warm. Do not use it to cool food down.
•
It is normal for the fan to operate during the
Warm function.
Summary of Contents for LSWC307 Series
Page 137: ...69 Memo ESPAÑOL Memo ...
Page 138: ...70 Memo Memo ...
Page 139: ...71 Memo ESPAÑOL Memo ...
