LG LSWC307 Series, Owner'S Manual

Page: 15 / 140

15 OPERATION
ENGLISH Settings
Press and hold Clock key for three seconds to select
and adjust oven settings.
The
Setting key allows you to:
•
set the hour mode on the clock (12 or 24 hours)
•
enable/disable convection auto conversion
•
adjust the oven temperature
•
select display language
•
activate/deactivate the preheating alarm light
•
set the beeper volume
•
switch the temperature scale between Fahrenheit
and Celsius
•
disable/enable demo mode
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
Touch and hold Clock until CLO appears in the
display.
2
Touch 1 to select a 12-hour clock, or 2 to select
a 24-hour clock.
3
Touch Start to accept the change.
Setting Convection Auto Conversion
(Only for Lower Oven)
When
Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This
auto-converted temperature shows on the display. For
example, select Conv. Bake , enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
Touch and hold Clock until CLO appears in the
display. Then touch Clock repeatedly until Auto
appears in the display.
2
Touch 1 to enable or 2 to disable auto
conversion.
3
Touch Start to accept the change.
Adjusting the Oven Temperature
(Only for Lower Oven)
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too
cold, you can adjust the oven temperature yourself.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
1
Touch and hold Clock until CLO appears in the
display. Then touch Clock repeatedly until L_AJ
appears in the display.
2
Use the number keys to enter the number
of degrees you want to adjust the oven
temperature.
3
Adjust the temperature either up or down by
touching Clock repeatedly to toggle between
plus (+) or minus (-).
4
Touch Start to accept the change.
NOTE
•
This adjustment does not affect the broiling
or Self Clean temperatures. The adjustment
is retained in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35 °F or 19 °C.
•
Once the temperature is increased or
decreased, the display shows the adjusted
temperature until it readjusts.
Selecting the Display Language
The oven control is set to display in English but can
be changed to display in Spanish or French.
1
Touch and hold Clock until CLO appears in the
display. Then touch Clock repeatedly until Lng
appears in the display.
2
Touch 1 for English, 2 for Spansh, or 3 for
French.
3
Touch Start to accept the change.