36
CARE AND CLEANING
Removing and Replacing the
Oven Door and Warming Drawer
Removing the oven door
1. F
ully open the door. Pull the hinge locks down toward
the door frame, to the unlocked position. A tool, such as a
small flat-blade screwdriver, may be required.
2. Firmly grasp both sides of the door at the top.
Close the door to the removal position (approximately five
degrees) which is halfway between the broil stop position
and fully closed.
3. Lift the door up and out until the hinge arm is clear off of
the slot. Put the door on the floor.
CAUTION
• The door is very heavy. Be careful when removing and
lifting the door.
• DO NOT lift the door by the handle.
• DO NOT hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring or stressing the glass may
weaken its structure, causing an increased risk of
breakage at a later time.
Push hinge locks down to unlock
Hinge arm
Door frame
Slot
Hinge lock
Removal Position
About 5°
Push hinge locks up to lock
Replacing the oven door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position,
seat the indentation of the hinge arm into the bottom
edge of the hinge slot. The notch in the hinge arm must
be fully seated into the bottom of the slot.
3. Fully open the door. If the door will not fully open, the
indentation is not seated correctly in the bottom edge of
the slot.
4. Push the hinge locks down against the front frame of the
oven cavity to the locked position. Close the oven door.
Slot
Hinge arm
Hinge lock
Door frame
Indentation
Bottom edge of slot
Hinge arm
