3-18
COMPONENT ACCESS
REMOVING A SIDE PANEL
7. Remove the screw from the left and right each
side panel.
8. Pull the back of the side panel out from the range
approximately 10
˚
.
9. Push forward and remove the side panel.
1. Turn off the electrical supply and gas supply
going to the range.
2. Remove the oven door from the range
(see page 3-15 for the procedure).
3. Pull the range away from the wall so you can
access the back of the unit.
4. Remove the back cover (see step 4 on 3-2 for
procedure)
5. Remove the manifold panel & cooktop plate. (see
page 3-5 for the procedure.
6. Remove the 6 screws from the top of the side
panel.
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the range.
- Some parts may have sharp edges, which
could result in injury.