manualshive.com logo in svg

LG LRE3193BD, Service Manual

The LG LRE3193BD is a sleek and stylish electric range with innovative features to enhance your cooking experience. To ensure seamless operation and maintenance, you can easily access its comprehensive Service Manual for free download at manualshive.com. Maximize the potential of your appliance with this user-friendly manual.

Share
Download
background image

 

-4-

GENERAL

                                                                                                                                   

     (Page)

COMPONENT ACCESS  --------------------------------------------------------------------------------------------------------------------------------------------------------  3-1 ~ 3-15

• Removing PCBs (Main PCB and Relay PCB)

 ----------------------------------------------------------------------------------------------------------------------------------------------------  3-4

• Removing the Surface Element and the Ceramic Glass Cooktop 

 ------------------------------------------------------------------------------------------------------------------------  3-5

• Removing the Door Latch and the Door Switch 

 -------------------------------------------------------------------------------------------------------------------------------------------------  3-6

• Removing the Outer Broil Element(Sheathed Heater) 

 ----------------------------------------------------------------------------------------------------------------------------------------  3-7

• Removing the Inner Broil Element(Charcoal Heater) 

 -----------------------------------------------------------------------------------------------------------------------------------------  3-8

• Removing the HIIDDEN BAKE element 

 -----------------------------------------------------------------------------------------------------------------------------------------------------------  3-9

• Removing the CONVECTION, Fan blade and Fan motor 

 ---------------------------------------------------------------------------------------------------------------------------------  3-10

• Removing the Oven light & Socket assembly 

 --------------------------------------------------------------------------------------------------------------------------------------------------  3-11

• Removing the Oven temperature Sensor 

 -------------------------------------------------------------------------------------------------------------------------------------------------------  3-12

• Removing & Replacing the Lift-off Oven Door 

 -------------------------------------------------------------------------------------------------------------------------------------------------  3-13

• Removing the Oven Door Handle 

 ------------------------------------------------------------------------------------------------------------------------------------------------------------------  3-14

• Removing the Oven Door’s Inner Glass 

 ---------------------------------------------------------------------------------------------------------------------------------------------------------  3-14

• Removing the Oven Door Gasket 

 ------------------------------------------------------------------------------------------------------------------------------------------------------------------  3-14

• Removing the Side Panel 

 -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------  3-15

COMPONENT TEST  ---------------------------------------------------------------------------------------------------------------------------------------------------------------  4-1 ~ 4-7

• Convection Motor 

 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-1

• Oven Sensor 

 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-2

• Conv. heater 

 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-2

• Door switch

 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-3

• Oven lamp 

 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-3

• Inner Broil heater 

 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-3

• Outer Broil heater 

 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-4

• Bake heater 

 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-5

• Conv. heater  

 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-6

• Single surface unit(LR, RR) 

 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-6

• Dual surface unit(LF, RF) 

 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-6

• Center Rear(CR): Element 

 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  4-7

COMPOSITION OF CONTROL  ------------------------------------------------------------------------------------------------------------------------------------------------  5-1 ~ 5-5

• Wiring Diagram 

 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  5-1

• Key Matrix 

 -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  5-2

Summary of Contents for LRE3193BD















































































Reviews:

No comments

Related manuals for LRE3193BD

Panasonic NN-GN68KS Service Manual preview
NN-GN68KS
Brand: Panasonic Pages: 38
Jenn-Air UMC5200BAB Use & Care Manual preview
UMC5200BAB
Brand: Jenn-Air Pages: 72
Jenn-Air JJW7530DDS Use & Care Manual preview
JJW7530DDS
Brand: Jenn-Air Pages: 60
Jenn-Air JJW6024HL Use & Care Manual preview
JJW6024HL
Brand: Jenn-Air Pages: 28
Jenn-Air JMDFS24GS Use And Care Manual preview
JMDFS24GS
Brand: Jenn-Air Pages: 36
Jenn-Air JMC3415ES User Manual preview
JMC3415ES
Brand: Jenn-Air Pages: 48
Jenn-Air JJW8.527 User Manual preview
JJW8.527
Brand: Jenn-Air Pages: 36
Jenn-Air JBS7524BS Instructions Manual preview
JBS7524BS
Brand: Jenn-Air Pages: 16
Jenn-Air JJW2327 Use & Care Manual preview
JJW2327
Brand: Jenn-Air Pages: 60
CDA SA117 Manual For Installation, Use And Maintenance preview
SA117
Brand: CDA Pages: 20
Viking VMOS201SS Installation Instructions preview
VMOS201SS
Brand: Viking Pages: 2
Inoxtrend GCA-GUA 304 Instructions For The Installation, Use And Maintenance preview
GCA-GUA 304
Brand: Inoxtrend Pages: 21
Toastmaster TM-072EM Instruction Manual preview
TM-072EM
Brand: Toastmaster Pages: 12
Gaggenau BO 471 2 Series Instruction Manual preview
BO 471 2 Series
Brand: Gaggenau Pages: 60
NEFF B1541N Instructions For Use Manual preview
B1541N
Brand: NEFF Pages: 60
Jenn-Air JJW9630DDW Installation Instructions Manual preview
JJW9630DDW
Brand: Jenn-Air Pages: 7
Jenn-Air JMC2430LM Control Manual preview
JMC2430LM
Brand: Jenn-Air Pages: 53
Zelmer ZME8101SD User Manual preview
ZME8101SD
Brand: Zelmer Pages: 24

Brands by name

Popular brands

Load more brands