10
HANDLE REMOVAL
(CONT.)
HANDLE REINSTALLATION
REFRIGERATOR DOOR REMOVAL AND REINSTALLATION
REFRIGERATOR DOOR REMOVAL
w
WARNING
Electric Shock Hazard
• Disconnect electrical supply to the refrigerator
before installing. Failure to do so could result in
death or serious injury.
• Do not put hands or feet or metal sticks into the air
vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.
• Be careful when you work with the hinge, base
grille, and stopper. You may be injured.
Before you begin, remove food and bins from the
doors.
If your entrance door is too narrow for the refrigerator
to pass through, remove the refrigerator door and
move the refrigerator sideways through the doorway.
Place the handle on the door by aligning handle
footprints to fit mounting fasteners and tightening
the set screws with a 2.5 mm (3/32") Allen
wrench.
NOTE:
If the handle mounting fasteners need to
be tightened or removed, use a 1/4" Allen wrench.
To remove the left refrigerator door:
You might want to suggest turning the water
off before doing this.
Pull the water tube out of the fitting while
pressing the release ring on the fitting.
NOTE :
When you pull out the tube, first you
have to push the collet by opposite direction
of arrow in the upper picture and pull the tube
out by direction of arrow.
1
Mounting
Fasteners
Collet
