LG LMX21981 Series, Training Manual

Page: 10 / 78

LMX21981xx REFRIGERATOR
LMX21981xx Page 8 TRAINING MANUAL
FLOORING
The refrigerator must be installed on a solidly constructed floor to minimize noise and
vibration. The refrigerator must be level. If necessary, adjust the leveling legs under the
front of the refrigerator to compensate for variations in the flooring. This is easier if the
refrigerator is tipped slightly backward to take the weight off the legs. Turn them
clockwise to raise the refrigerator or counterclockwise to lower it.
Never install the refrigerator on a platform or a weakly supported structure.
When moving the refrigerator for cleaning or service, be sure to protect the floor. Pull
the refrigerator straight out. Do not walk or wiggle it; floor damage or side panel damage
may occur.
HANDLE REMOVAL
It may be necessary to remove the handles
to get the refrigerator through a door.
Loosen the set screws with a
3
/
32
”
(2.5 mm) Allen wrench.
Remove the handle.
If the mounting bolts require removal or
adjustment, use a
¼ ” Allen wrench.
Use extreme caution when removing the
handles to avoid scratching the doors.
When you remove or replace a handle,
push (or pull) firmly but do not damage the
handle or the door by using excessive
force.
Replace the handles by placing the handles
on the mounting bolts and tightening the
set screws.