28
OPERATION
NOTE
3) After 5 seconds of idle time, the last mode set will be saved, and the display will return to normal.
d
Fridge
Press this button repeatedly to select a desired temperature between 1 °C and 7 °C.
• The default fridge temperature is 3 °C.
e
Water Filter
Replace the water filter when the
h
icon turns on. After replacing the water filter, press and hold the
Water Filter
button for three seconds to turn the icon light off. Replace the water filter approximately
every six months.
f
Lock
The lock function disables every other button on the display.
• When power is initially connected to the appliance, the lock function is off.
• To lock the control panel buttons, press and hold the
Lock
button until the
k
icon appears in the
display and the function is activated.
• To disable the function, press and hold the
Lock
button for approximately three seconds.
g
Measured Fill
The measured fill function dispenses premeasured amounts of water automatically.
h
Water & Ice Type
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
NOTE
• When the appliance is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
• The displayed temperature is the target temperature, and not the actual temperature of the appliance.
The actual appliance temperature depends on the food inside the appliance.
• This appliance incorporates an earth connection for functional purposes only.
Display Mode and InstaView Display Mode (For Store Use Only)
• The
Display Mode
disables all cooling in the fridge and freezer sections to conserve energy while on
display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
- To deactivate/activate the Display Mode:
Open either fridge door. Press the
Express Freeze
button 3 times while pressing and holding the
Fridge
button. The control panel beeps and the temperature settings display to confirm that Display
Mode is deactivated. Use the same procedure to activate Display Mode.
• The
InstaView Display Mode
automatically turns the LED light inside the InstaView Door-in-Door on
and off in cycles of 10 seconds ON and 2 minutes 50 seconds OFF.
- To activate the InstaView Display Mode:
Activate the Display Mode first. Then open all fridge and freezer doors and within 5 seconds knock 3
times on the door glass.
Summary of Contents for LM85SXD
Page 24: ...24 OPERATION Interior Door in Door InstaView Door in Door ...
Page 54: ...Memo ...
Page 55: ...Memo ...
Page 56: ......