12
Safety
■Precautions
■
■ Precautions■common■to■the■main■unit,■built-in■battery,■
charging■equipment,■au■Micro■IC■Card■(LTE),■peripheral■
devices
Be■sure■to■read■the■following■hazards■before■use.
Do
Be sure to use only the specified peripheral
devices. Use of other peripheral devices might
cause overheating, ignition, rupture, fault, or
leakage of liquid.
Don’t
Do not use, store, or leave this product in hot
places (e.g. by the fire, near a heater, under a
kotatsu, in direct sunlight, in a car in the hot sun).
Doing so might cause ignition, rupture, fault, fire, or
injury.
Do
Before entering an area where flammable gas is
generated such as a gas station, be sure to turn
off this product. Also, do not charge this product.
Failure to observe these precautions might cause
the gas to catch fire. In addition, when using the
clearing function of Osaifu-Keitai
®
at a gas station,
etc., make sure to turn off the power in advance.
(If Osaifu-Keitai
®
has been locked, cancel the lock
before turning off the power.)
Don’t
Do not put this product in a cooking apparatus
such as a microwave oven or a pressure vessel.
Doing so might cause ignition, rupture, fault, fire, or
injury.
Don’t
Do not throw this product into a fire or heat it.
Doing so might cause ignition, rupture, or fire.
Don’t
Do not short-circuit the connection terminals.
Do not allow conductive foreign objects (metal
fragments, pencil leads, etc.) to come into contact
with or get inside the connection terminals. Doing
so might cause fire, or a fault.
Don’t
When using metal accessories, etc., make sure
not to allow the metal part come in contact with
the connection terminals or power outlet. Doing
so might cause electric shock, ignition, injury, or a
fault.
Don’t
Do not expose the camera lens to direct sunlight
for an extended period. Doing so might cause
ignition, rupture, or fire by the light-collecting
mechanism of the lens.
Not
disassembly
The customer is not allowed to disassemble,
modify, or repair this product.
Doing so might cause a fault, ignition, electric
shock, or injury. The Company is not liable even
in the event of any non-conformities arising on
this product or peripheral devices as a result of
modification, etc. Modification of this product is in
violation of the Wireless Telegraphy Act.
