13
Prepare the terminals and AC cables according to the right table.
Put AC cable through terminal cover as
shown in the figure.
Note: Please use the terminals in accessory
box.
Press the 6 connectors on cable conductor core tightly.
Note: Make sure cable jacket is not locked within the connector.
A
B
C
D
1
Grade
Description
Value
A
Outside diameter
13-18 mm
B
Separated wire length
20-25 mm
C
Conductor wire length
7-9 mm
D
Conductor core section
4-6 mm
2
Cable
Single Hole Seal Ring
Connection
Terminal
Screw Cap
AC Cover
Insulator
2
3
4
1. Connect the assembled AC cables into AC terminals with fastening torque about 2.0-2.5N·m.
Note: Connect back-up terminals before connecting on-grid terminals. Make sure it is not connected
to the wrong side.
2. Lock the cover and screw the cap.
Tightening torque
2.0-2.5N·m
