LG LG9200 Service Manual Download Page 91

Page: 91 / 142

5. DOWNLOAD

- 104 -

Downloading Software

A. The Purpose of Downloading Software

• To make a phone operate at the first manufacturing

– A phone = Ha Software

– A phone cannot operate with hardware alone.

– The hardware with the suitable software can operate properly.

• To upgrade the software of the phone

– The software of the phone may be changed to enhance the performance of the phone.

– The older version software of the phone can be replaced to the newer version.

B. The Environment of Downloading Software

1. In case of using the Data Kit

• Preparation

– Target Handset (

LG9200

)

– Data kit

– Battery

– IBM compatible PC supporting RS-232 with Windows 98 or newer

• If you use data kit, you should have a battery with the voltage above 3.7V.

5. DOWNLOAD

LG9200

Handset

PIF

PC with RS-232

Z3X-BOX.COM

Summary of Contents for LG9200















































































































































Search results

Summary of Contents for LG9200

Reviews:

LG LG9200, Service Manual, Page: 91 / 142

Search results

Summary of Contents for LG9200

Reviews: