LG LG-T515, Service Manual

Page: 174 / 194

- 174 - LGE Internal Use Only Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
13.AUTO CALIBRATION
12.5 AGC
This procedure is for Rx calibration.
In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the result window
will show correction values per every power level and gain code and the same measure is performed per every
frequency.
12.6 APC
This procedure is for Tx calibration.
In this procedure you can get proper scale factor value and measured power level.
12.7 ADC
This procedure is for battery calibration.
You can get main Battery Config Table and temperature Config Table will be reset.
11.8 Target Power
29.8 dBm 29.8 dBm 29.8 dBm Max power
1909.8 MHz 1880 MHz 1850.2 MHz Frequency
810 661 512 Channel
PCS 1900
29.8 dBm 29.8 dBm 29.8 dBm Max power
1784.8 MHz 1747.6 MHz 1710.2 MHz Frequency
885 699 512 Channel
DCS1800
32.8 dBm 32.8 dBm 32.8 dBm Max power
914.8 MHz 897.4 MHz 880.2 MHz Frequency
124 37 975 Channel
EGSM 900
32.8 dBm 32.8 dBm 32.8 dBm Max power
848.8 MHz 836.8 MHz 824.2 MHz Frequency
251 191 128 Channel
GSM 850
High Middle Low Description BAND
13.5
13.6
13.7
13.8