3
Safety
Do not scratch the coating surface of the frame.
Scratches may decrease the total solar output
due to corrosion of the frame.
Do not artificially concentrate sunlight on the solar
module surface. Failure to comply may result in
product damage or failure.
Do not apply a shock to the junction box of the
module or pull the cable. Do not remove the
labels attached to the module. Failure to comply
may result in damage of the product.
If the installing modules on curved surface, (e. g.
arch type), as shown in the below picture, do not
forcefully modify the module in the installation
when connecting it with the structure. Only install
the module in the place where the structure for
the panels has been properly set up. An improper
structure may cause deformation of the panels.
Panels may also be damaged by unapproved
installation methods such as the use of a crane.
The instructions related to safety and use indicated in
the this installation manual are intended for the
prevention of unexpected danger, damage, or failure.
Non-compliance with the instructions may cause
product damage, product failure, and/or serious
bodily injury or death.
Do not contact electrically active parts of the
panel, such as terminals, without appropriate
safety gear. Contact may result in lethal spark or
electric shock.
Do not use or install if the module is broken or torn.
Failure to comply may result in electric shock.
Perform all work in dry conditions and use only dry
tools. Do not handle wet panels without appropriate
protection equipment. Failure to comply may result
in accident or death. accident or death.
Damaged modules must be treated with safety
protection equipment. Failure to comply may
result in serious bodily injury or death.
Do not approach the damaged or broken module
unless you are an authorized or qualified expert.
Failure to comply may result in serious bodily
injury or death.
Use proper equipment, connectors, wires and
buttresses for the installation of the module. Failure
to comply may result in product damage, product
failure or bodily injury.
Installation during rain, heavy wind or snowy day
may result in bodily injury or death.
Holes in the frame or glass of the module may
decrease the strength of the frame or break the
glass.
Do not touch the glass surface or frame of the solar
module after installation of the module. It may result
in injury or death.
Heavy objects must be kept off of the solar module.
Do not stand on or step on the module. Do not drop
the module. Failure to comply may result in product
damage, product failure or bodily injury.
Module
Module
Installing structure
(bent type)
Installing structure
(Stralght type)
Product Deformation
Occurrence of space
