ENGLISH
8
PARTS AND FEATURES
CONTROL PANEL
1
2
1. CYCLES
Select your desired cycle.
STEAM POWER
This cycle is for heavily and hard soiled dishes. Steam Power
defaults to the highest spray intensity and uses the power of
steam to wash heavily soiled dishes.
STEAM DUAL
This cycle washes the upper and lower racks at different spray
intensities. The default setting for this cycle washes the low-
er rack with strong spray intensity and the upper rack with
soft spray intensity. This provides optimum cleaning perfor-
mance for mixed loads, including fine china and stemware. If
other combinations are desired, use the steps listed below to
change the intensities or to use the HALF LOAD feature.
How To Use Dual Intensity:
1. Select Steam Dual.
2. Press the Spray button to toggle between Soft, Medium
and Strong for the upper spray arm.
3. After making your selection for the upper spray arm, press
the Half Load button.
4. Press the Spray button to toggle between Soft, Medium
and Strong for the lower spray arm.
5. Close the door to start the cycle.
STEAM DELICATE
This cycle adds the gentle power of steam to boost the clean-
ing power of the delicate cycle. The cycle is intended for ef-
fectively cleaning delicate items such as fine china and stem-
ware.
NORMAL
This cycle is for normally soiled, everyday loads.
QUICK & DRY
This is a shortened cycle that is intended for washing and dry-
ing recently used dishes or lightly soiled loads. During this
cycle, both spray arms will run at the same time.
QUICK
This is a shortened cycle that is intended to wash recently
used or lightly soiled loads, without drying.
CHIME ON/OFF
To enable or disable the chime, first, turn on the dishwasher.
Press and hold the Quick and Steam Delicate buttons simul-
taneously for approximately three seconds.
2. CANCEL
To cancel a cycle, open the door and then press and hold the
Steam Delicate and Normal
buttons together for approxi-
mately three seconds. The drain pump will deactivate and
the cycle will cancel. The display will show “dr” and the dish-
washer will drain the water. After the dishwasher is drained,
the power will turn off.
If power is turned on and no cycle has been selected, the
dishwasher will power off within four minutes.
3. CYCLE OPTIONS
(Refer to the control panel on the next page)
Press the desired cycle and then select the options for that
cycle.
SPRAY (INTENSITY)
First, select the desired cycle. Press the Spray button repeat-
edly until the desired spray intensity is selected.
Soft
( ),
Medium
( ),
Strong
( )
RINSE
Repeated pressing of the Rinse button will select the desired
Rinse option. The Sanitary, Extra Rinse, or Sanitary and Extra
Rinse lights will show in the bottom left portion of the dis-
play.
The RINSE AID symbol
indicates that the rinse aid
needs to be refilled.
SANITARY (
)
This high-temperature rinse sanitizes dishes and glassware in
accordance with NSF/ANSI Standard 184 for residential dish-
washers. Certified dishwashers are not intended for licensed
food establishments.
Select Steam Dual
Press the Spray button to toggle between soft, medium and
strong for the upper spray arm.
After making your selection for the upper spray arm, press the
Half Load button.
Press the Spray button to toggle between Soft, Medium and
Strong for the lower spray arm.
Close the door start the cycle
