LG LD1454WBFES2 Service Manual Download Page 16

Page: 16 / 63

②

③

④

⑦

⑥

⑪

⑩

⑤

⑨

⑧

⑦

Program

•

Press the cycle that corresponds to your desired wash cycle.

⑧

Extra Hot

•

If you select the

Extra Hot

function, the operating temperature will be up to 80ºC.

(Dual Intensity, Auto, Eco, Eco Plus)

•

To engage the

Extra Hot

rinse in the allowable cycles, hold down the

Dual Intensity

Auto

buttons

simultaneously.

⑨

Beep On/Off

• The dishwasher must be switched on.

• The beep on/off function can be engaged or disengaged by pressing the

Delay Start

and

Quick & Dry

buttons

simultaneously for a few seconds.

⑩

Eco Plus

• If you want to use

Eco Plus

course, press & hold

Eco

button for 3 seconds.

⑪

Child Lock

• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.

• To activate or release the

Child Lock

function, press the

Quick & Dry

and

Quick

buttons simultaneously for a

few seconds while the dishwasher is in operation.

•

All controls will be disabled except the

Child Lock

and

Power

buttons.

•

Turning off the dishwasher will not reset the

Child Lock

function. You must release the

Child Lock

before you

can operate the dishwasher.

⑫

Power

•

For operating, press this button first for power on.

• After the programme has completed, this button automatically switches off for safety and energy saving.

• The unit will automatically turn off if the programme is interrupted and not resumed, or started within 4 minutes.

•

In case of mild power surges to the machine, the power may be automatically turned off for safety.

•

To turn the power off during a programme, press the

Power

button twice.

Summary of Contents for LD1454WBFES2
































































Search results

Summary of Contents for LD1454WBFES2

Reviews:

Related manuals for LD1454WBFES2

Brands by name

Popular brands

LG LD1454WBFES2, Service Manual

Search results

Summary of Contents for LD1454WBFES2

Reviews:

Related manuals for LD1454WBFES2

Brands by name

Popular brands