background image

■ 

If a problem occurs check below to see whether this can be solved.

■ 

In the unlikely event that the problem cannot be rectified, please contact a

service engineer.

Possible Causes

• Plug is not properly inserted into the socket.
• Fuse blown or circuit breaker tripped.
• The electricity of the house was cut off.

• Door is not fully closed.
• The start button is not pressed.

• The drain hose is kinked.
• The filter is clogged. (Clean the filter.)

• Excessive water is supplied than the normal water level.
• There is a problem with the inlet valve.

• Water is not supplied. (Water tap is not opened.)

• Water is leaking from the Hose connections.
• Damage to the unit has been caused by a water leak.

• The water heater circuit is damaged.

• The mounting of the spray arms is blocked by food 

particles. (Clean the holes of the spray arm.)

• The amount of detergent or rinse-aid set incorrectly.
• The salt container is empty.
• The salt container cap is not securely screwed on.

• Too little Rinse-Aid dispensed.

• Too little Rinse-Aid dispensed.

• Incorrect amount of detergent.
• Utensils incorrectly arranged or overloaded.
• Filters are clogged.
• Water jet holes of spray arms blocked.
• Spray arms’ rotation obstructed by utensils.
• Unsuitable program selected.

• No error message.(See page 18.)

Problem

No lights come on when the   
power is turned on.

The machine does not start.

Water is not pumped away.
(The display show “      ” code.)

The display shows “      ” code.

(Automatically Drain Pump operated.)

The display shows “      ” code.

The display shows “       ” code.

The display shows “      ” code.

The spray arms do not rotate 
smoothly.

White deposits are left on the
dish washer after washing.

Streaks are left on glassware.

Dry results are not satisfactory.

Washing results are not 
satisfactory.

The display shows “       ”code.

TROUBLE SHOOTING GUIDE

21

MFL30149778 

 

2008.1.31 

11:41 

AM 

 

페이지21 

 

 

001 

GateRip_A4

Summary of Contents for LD-2166LH

























Reviews: