background image

Troubleshooting

22

T

roubleshoo

ting

4

Troubleshooting

Symptoms Cause

Solution

Power doesn't turned on.

The unit doesn't operate.

Leads and connectors are not 
properly.

Confi rm once more that all connections 
are correct.

The fuse is blown.

Rectify the problem that caused the fuse 
to blow, and then replace it. Be very sure 
to install the correct fuse with the same 
rate.

Noise and other factors 
are causing the built in 
microprocessor to operate 
incorrectly.

Turn the unit off  and then on again.

No sound is heard.

Cables are not connected 
correctly.

Connect the cables correctly.

There's audio skipping.

This unit is not fi rmly secured.

Secure this unit fi rmly.

The playback is not possible.

The disc is dirty.

Clean the disc.

The disc of unplayable type is 
loaded. 

Check what type the disc.

Radio stations cannot be 
tuned in.

The signal strength of the 
stations is too weak. (when 
tuning in with automatic 
tuning.)

Tuned in the stations manually.

No station has been preset 
or preset stations have been 
cleared. (When tuning by 
scanning preset stations.)

Preset the stations. (Refer to the page 
17.)

iPod/ iPhone does not work.

Check whether iPod/ iPhone 
is connected to the unit 
correctly.

Connect it to the unit correctly.

The unit does not operate 
correctly even when the 
appropriate remote control 
buttons are pressed.

Battery power is low.

Load a new battery.

Summary of Contents for LCF610IR

























Reviews: