3-6 LAMP
Unplug Refrigerator, or disconnect power at the circuit
breaker.
If necessary, remove top shelf or shelves.
1. Unplug refrigerator power cord form outlet.
2. Remove screw with driver.
3. Grasp the cover Lamp,pull the cover downward.
3-6-2 Freezer Compartment Lamp
3-7 MULTI DUCT
1. Remove the upper and
lower Caps by using a
flat screwdriver, and
remove 2 screws.
(Figure 3)
2. Disconnect the lead wire
on the bottom position.
Figure 3
3-8 MAIN PWB
1) Loosen 3 screws on the PWB cover.
2) Remove the PWB cover
3) Disconnect wire harness and replace the main PWB in
the reverse order of removal.
1) Unplug refrigerator power cord from electric outlet.
2) Put flat screwdriver into service hole and remove cover
of refrigerator light.
3-6-1 Refrigerator Compartment Lamp
4) Replace the LED assembly.
3) Remove the LED assembly from connector.
<Swing Model>
<Drawer Model>
8
Summary of Contents for LBC24360ST
Page 15: ...5 CIRCUIT DIAGRAM 15 ...
Page 16: ...16 ...
Page 18: ...6 2 Display PCB Sub PCB P No Picture CON01 EBR766839 2013 05 18 ...
Page 69: ...July 2013 P No MFL31442312 ...