Connecting to a rear view camera
When using the unit with a rear view camera, automatic switching to video from a rear view
camera is possible when the gearshift is moved to
REVERSE (R)
position.
Rear view mode also allows you to check what is behind you while driving.
Notes
• Use input only for reverse or mirror image rear view camera. Other use may result in injury or
damage.
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or
backing into a tight parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
• Please note that the edges of the rear view camera images may differ slightly according to
whether full screen images are displayed when backing, and whether the images are used
for checking the rear when the vehicle is moving forward.
14
Connection
For information on
other leads see page
11.
Use the optional extension lead.
Connection method
Clamp the reversing lamp lead.
Clamp firmly with needle-nosed
pliers.
Check the position of your vehicle’s
reversing lamp (the one that lights
up when the gearstick is in reverse
[R]) and find the reversing lamp lead
in the boot.
Reversing
lamp lead
See Page 12 about
connection method.
CAM V
(Camera Video)
Pink (REVERSEGEAR SIGNAL
INPUT)
This is connected so that thesystem can
detect whether the vehicle is moving
forwards or backwards. Connect the
pink lead to the lead whose voltage
changes when the reverse gear is
engaged. Unless connected, the
sensor may not detect your vehicle
travelling forward/backward properly,
and thus the position of your vehicle
detected by the sensor may be
misaligned from the actual position.
