36
Radio (RDS) operation
Listening to the radio stations
1. Press the “SRC” button to select the radio.
2. Press the “BAND” repeatedly to select a band.
The mode switches as follows.
FM1
t
FM2
t
FM3
t
AM (MW)
3.
Seek tuning :
Touch the
?m
or
M?
buttons.
The tuner will scan the frequencies until a broadcast with
strong enough signal is found.
Manual tuning :
Touch the
m
or
M
buttons repeatedly until a preset
number you want is selected.
AS (Auto Scan)
This function lets you automatically store the 6 strongest
broadcast frequencies.
1. Select the band (FM1, FM2, FM3,
AM (MW)
) which you
want to store a station into.
2. Touch the “AS” button.
Local stations with the strongest signals are searched and
stored automatically in the selected radio band.
3. To cancel, touch it again.
Storing and recalling stations.
You can easily store up to 6 preset stations for later recall at
the touch of a button.
1. Select the band (FM1, FM2, FM3,
AM (MW)
) you want to
store a station into.
2. Touch the
m
or
M
buttons to select the desired
frequency.
3. Touch and hold one of the numeric buttons (1-6).
The preset station information will be displayed.
The selected preset station has been stored in memory.
4. Repeat the steps 2 and 3 to preset other stations.
Next time, if you touch the number button (1-6),
the station is recalled from the memory.
Notes
•
As FM1, FM2, FM3 have the same frequency range, up to
18 stations can be preset for FM.
•
When a new station is stored in the preset station button,
the previously preset station is automatically erased.
BAND
RSE
SRC
Summary of Contents for LAD-9600R
Page 57: ......
Page 58: ...P NO MFL36334735 ...
