CAR CD/MP3/WMA Receiver
9
Listening to the radio - more you can do
Auto search memory
Press
U
U
/AS
. The six strongest broadcast frequencies will be stored under preset
button 1-6 in the order of their signal strength.To cancel, press
U
U
/AS
.
Storing and recalling broadcast frequencies
1 Press
BAND
to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.
To scan the preset stations
Press
u
u
/PS
. Each preset station appears. To cancel, press
u
u
/PS
.
To tune in the preset stations
Press
BAND
to select the desired band and press the desired preset button 1-6
(preset button 1-6 on the remote control).
Note
•
Up to 24 stations, 6 for each of three FM bands and 6 MW(AM) stations can
be stored in the memory.
•
When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is
automatically erased.
Moving to another drive
When connecting this unit to multi reader, press
BAND/DRIVE
(
BAND/DRV
on
remote control) to go to the next drive. Each time you press the button, the
driver modes changes.
Note
•
If the USB device is already connected, press
SOURCE
(
SRC
on remote
control.) to select a source to USB.
•
Pause / Intro Scan / Repeat / Shuffle / ... functions are same with “Listening a
CD - more you can do”. Refer to the page 10.
Listening to the radio
ON PLAYER
ON REMOTE
1. Select a source to tuner.
2. Select a band.
3. Auto seek.
Manual seek.
SOURCE
BAND
<
/
/
>
Press and hold
<
/
/
>
SRC
3
3
/ BAND
?mm
/
MM?
Press and hold
?mm
/
MM?
Connecting USB device
ON PLAYER
ON REMOTE
1. Open the USB cover.
2. Connect the USB device.
3. Adjust the volume.
-
-
Rotate PWR
-
-
VOLUME
