LG LAC3900RN, Owner'S Manual

Page: 10 / 16

10 CAR CD/MP3/WMA Receiver
Basic operation - more you can do
Mute
Press VOL/MUTE ( POWER on the remote control) to cut the sound. To can-
cel it, press again.
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The func-
tion helps you to enjoy sound more plentifully. Press
EQ/XDSS+ repeatedly. The
indicator lights up in the following order.
POP
t
CLASSIC
t
ROCK
t
JAZZ
t
VOCAL
t
SALSA
t
SAMBA
t
REGGAE t RUSSY t USER1 t USER2 t Off (not displayed)
Note
• When XDSS+ is set to “Off”, you can adjust the EQ settings.
• You can adjust sound level to your preference. Once you select a USER mode
and then adjust the sound level, it will be automatically stored for the currently
selected USER mode. Refer to the “Adjusting the sound level” for USER 1/2
mode.
Adjusting the sound level
Press SEL ( SEL/MENU on the remote control) repeatedly to select the mode
you want to adjust from VOL(volume), BAL(left/right speaker), FAD(front/rear
speaker) and SUB(Sub-woofer:optional). To adjust sound quality, rotate
PWR or
press VOLUME on the remote control.
Note
When EQ and XDSS+ is set to “Off”, you can also adjust the sound level
(BAS(bass), MID(middle), TRB(treble)) settings.
XDSS+ (Extreme Dynamic Sound System)
Press and hold EQ/XDSS+ . ( XDSS+ : Improves the treble, bass sound.) To can-
cel it, press and hold it again.
Checking the clock
You can see the clock pressing DISP ( DISP . on the remote control).
Setting the clock
When RDS CT information is not received and then you set CT on the setting
menu to OFF, you can adjust the time by yourself.
Refer to the page 13 for setting the CT(Clock Time) ON/OFF.
1 Press the DISP ( DISP . on the remote control) and then, press and hold it for
more 1 second.
2 Press the
B? +( BB>
on the remote control) to adjust the hour.
3 Press the - ?b ( .bb on the remote control) to adjust the minute.
4 Press DISP ( DISP . on the remote control) again to finish the setting.
Basic Operation
ON PLAYER ON REMOTE
1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
PWR
SRC
Rotate PWR
POWER
SRC
VOLUME