manualshive.com logo in svg

LG L9322 Series, Owner'S Manual

Share
Download
LG L9322 Series Owner'S Manual Download Page 4

1

Saf
et

y Inf

orma

tion

Safety Information

4

LG Electronics hereby declares that this/these product(s) is/are in compliance with the 
essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC 
and 2009/125/EC.
European Standards Centre:
Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-(0)36-547-8888)
• 

Please note that this is NOT a Customer Service contact point. For Customer Service 
Information, see Warranty Card or contact the dealer that you purchased this product. 

Disposal of your old appliance

1.  When this crossed-out wheeled bin symbol is attached to a product it means the product 

is covered by the European Directive 2002/96/EC.

2.  All electrical and electronic products should be disposed of separately from the municipal 

waste stream via designated collection facilities appointed by the government or the local 
authorities.

3.  The correct disposal of your old appliance will help prevent potential negative conse-

quences for the environment and human health.

4.  For more detailed information about disposal of your old appliance, please contact your 

city office, waste disposal service or the shop where you purchased the product.

EEE Compliance with Directive. (for Turkey only)

Summary of Contents for L9322 Series































































Reviews:

No comments

Brands by name

Popular brands

Load more brands