manualshive.com logo in svg

LG L9322 Series, Owner'S Manual

Share
Download
LG L9322 Series Owner'S Manual Download Page 2

1

Saf
et

y Inf

orma

tion

Safety Information

2

1  Safety Information

CAUTION

RISK OF ELECTRIC SHOCK  

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC SHOCK 

DO NOT REMOVE COVER (OR BACK) 

NO USER-SERVICEABLE PARTS INSIDE 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended 
to alert the user to the presence of uninsulated dangerous voltage within the 
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric 
shock to persons. 

The exclamation point within an equilateral triangle is intended to alert the user to 
the presence of important operating and maintenance (servicing) instructions in the 
literature accompanying the product.

FCC WARNING: 

This equipment may generate or use radio frequency energy. Changes or modifications to this 

equipment may cause harmful interference unless the modifications are expressly approved in the instruction 
manual. The user could lose the authority to operate this equipment if an unauthorized change or modification 
is made.

Summary of Contents for L9322 Series































































Reviews:

No comments

Brands by name

Popular brands

Load more brands