5
ASSEMBLY AND PREPARATION
ENGLISH
Assembly Instructions
- The picture may differ from the actual product.
y
y
Before installing the product, if there are any water drops or foreign materials on the inner/outer side of
the glass, wipe them out with a soft cloth.
y
y
While using the product, if there are any water drops or foreign materials on the inner/outer side of the
glass, wipe them out with a soft cloth and install it again.
y
y
Assemble the product in a clean, uncontaminated area to prevent dust or foreign material from entering
it.
NOTE
1
Place a soft cloth on the table and place the Multi-touch Overlay Kit over it as illustrated.
2
Remove the internal protective film using the handle at the upper right corner of the glass as illustrated.
