11
Installation and Setup
Assembling and Connecting to the
Speakers
The front and rear speakers are detached from the
speaker stands. Connect the speaker cords and
assemble the front and rear speakers from speaker
stands as illustrated.
1. Connect the speaker cords to the appropriate
terminals on the bottom of each front and rear
speaker.
2. Attach the front and rear speakers to the speaker
stands by rotating the screw.
CAUTION
Rear speaker (wireless speakers) is no sound.
The DC power cable is not connected the Wireless TX and main unit.
Connect the Wireless TX and main unit with the DC power cable.
Power cord of wireless RX (or wireless speakers) is not connected.
Connect the Power cord of wireless RX (or wireless speakers).
LED indicator of Wireless TX is RED.
-
Turn on the main unit.
-
Set to sound mode by PL ll MOVIE, PL ll MUSIC or PL ll MTRX. (page 24)
- Set to XTS-ON. (page 24)
- Insert a 5.1 ch sound compatible disc.
Sound is cut off.
Change a channel of Wireless TX. (Follow steps “Setting a channel of Transmitter”)
If rear speaker (wireless speakers) is no sound after operating as above, disconnect
and connect the power cord of Wireless RX (or wireless speakers) or set up an ID of
wireless TX and wireless RX (or wireless speakers).
