LG KP175 Service Manual Download Page 105

Page: 105 / 135

LGE Internal Use Only

Only for training and service purposes

- 106 -

10. ENGINEERING MODE

10.1 MF Mode [MENU 1]

10.1.1 All Auto Test

This Function mode is designed to do the baseband test automatically. Selecting this menu will

process the test automatically (LCD, Backlight, Vibrator, Buzzer, Key Pad, Mic & Speaker, Camera

preview.), and phone displays the previous menu after completing the test.

10.1.2 Main LCD

This menu is to test the LCD Color display and Grey scale

1) Color : WHITE, RED, GREEN, BLUE, BLACK

2) Grey : 16 level. from black to white

10.1.3 LCD Backlight

This menu is to test the LCD Backlight.

1) Backlight on : LCD Backlight on.

2) Backlight off : LCD Backlight off.

10.1.4 Key Backlight

This menu is to test the KEY Backlight.

1) On : KEY Backlight on.

2) Off : Key Backlight off.

10.1.5 Speaker

This menu is to test the melody sound.

1) Melody on : Melody sound is played through the speaker.

2) Melody off : Melody sound is off.

10.1.6 Vibrator

This menu is to test the vibration mode.

1) Vibrator on : Vibration mode is on.

2) Vibrator off : Vibration mode is off.

Summary of Contents for KP175
































































































































Search results

Summary of Contents for KP175

Reviews:

Related manuals for KP175

Brands by name

Popular brands

LG KP175, Service Manual

Search results

Summary of Contents for KP175

Reviews:

Related manuals for KP175

Brands by name

Popular brands