background image

4

•  Do not plug in if control knob is in the ON position. 

Personal injury or product damage could result.

•  Keep children away and beware of obstructions 

when rewinding the cord to prevent personal injury 

The cord moves rapidly when rewinding.

•  Disconnect electrical supply before servicing or 

cleaning the unit or when cleaner is not in use. 

Failure to do so could result in electrical shock or personal 

injury.

•  Do not use vacuum cleaner to pick up anything that is 

burning or smoking such as cigarettes, or hot ashes. 

Doing so could result in death, fire or electrical shock.

•  Do not vacuum flammable or explosive substances 

such as gasoline, benzene, thinners, propane 

(liquids or gases). 

The fumes from these substances can create a fire hazard 

or explosion. Doing so could result in death or personal 

injury.

•  Do not handle plug or vacuum cleaner with wet 

hands. 

Doing so could result in death or electrical shock.

•  Do not unplug by pulling on cord. 

Doing so could result in product damage or electrical 

shock. To unplug, grasp the plug, not the cord.

•  Keep hair, loose clothing, fingers, and all parts of  

the body away from openings and moving parts. 

Failure to do so could result in electrical shock or personal 

injury.

•  Do not pull or carry by cord, use cord as a handle, 

close a door on cord, or pull cord around sharp 

edges or corners. Do not run vacuum cleaner over 

cord. Keep cord away from heated surfaces. 

Failure to do so could result in electrical shock or personal 

injury or fire or product damage.

•  The hose contains electrical wires. Do not use it if it 

is damaged, cut or punctured. 

Failure to do so could result in death,or electrical shock.

•  Do not allow to be used as toy. Close attention is 

necessary when used by or near children. 

Personal injury or product damage could result.

•  Do not use the vacuum cleaner if the power cord or 

plug is damaged or faulty. 

Personal injury or product damage could result. In these 

cases, contact LG Electronics Service Agent to avoid 

hazard.

•  Do not use vacuum cleaner if it has been under water. 

Personal injury or product damage could result. In these 

cases, contact LG Electronics Service Agent to avoid 

hazard.

•  Do not continue to vacuum if any parts appear 

missing or damaged. 

Personal injury or product damage could result. In these 

cases, contact LG Electronics Service Agent to avoid 

hazard.

•  Do not use an extension cord with this vacuum 

cleaner 

Fire hazard or product damage could result.

•  Using proper voltage. 

Using improper voltage may result in damage to the motor 

and possible injury to the user. Proper voltage is listed on 

the bottom of vacuum cleaner.

•  Turn off all controls before unplugging. 

Failure to do so could result in electrical shock or personal 

injury.

•  Do not change the plug in any way. 

Failure to do so could result in electrical shock or personal 

injury or product damage. Doing so result in death. If plug 

does not fit, contact a qualified electrician to install the 

proper outlet. 

If the supply cord is damaged, it must be replaced by 

the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

•  Repairs to electrical appliances may only be 

performed by qualified service engineers. 

Improper repairs may lead to serious hazards for the user.

•  Do not put fingers near the gear. 

Failure to do so could result in personal injury.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

gear

Summary of Contents for KOMPRESSOR PLUS VK9820 Series





















Reviews: