LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
- 19 -
3.2.2 GSM Transmitter
The RTR6235 transmitter outputs(DA_HB2_OUT and DA_LB1_OUT) include on-chip output matching
inductors. 50ohm output impedance is achieved by adding a series capacitor at the output pins. The
capacitor value may be optimized for specific applications and PCB characteristics based on pass-band
symmetry about the band center frequency, the suggested starting value is shown in Figure3.2.3.
The RTR6235 IC is able to support GSM 850/900 and GSM 1800/1900 mode transmitting. This design
guideline shows a Quad-band GSM application.
Both high-band and low band outputs are followed by resistive pads to ensure that the load Presented
to the outputs remains close to 50ohm. The low-band GSM. Tx path also includes a Tx-band SAW filter
to remove noise-spurious components and noise that would be amplified by the PA and appear in the
GSM Rx band
RTR6235
GSM PA
DA_HB2_OUT
DA_LB1_OUT
HB_IN
LB_IN
HB_OUT
LB_OUT
Tx
SAW
91
91
6pF
120
120
68
5pF
51
[Fig 1.3] GSM Transmitter matching
Summary of Contents for KE990 - Viewty Cell Phone 100 MB
Page 203: ...Note ...
Page 204: ...Note ...