LG KC550 Service Manual Download Page 22

Page: 22 / 183

- 23 -

3. TECHNICAL BRIEF

• Ready to connect to the Infineon’s Bluemoon Family Bluetooth Transceivers

- HCI (H5) optimized USIF (Universal Serial Interface)

- Dedicated PCM-style digital audio interface (I2S)

- Dedicated power supply

• Microcontroller-Like Extension Interface

For multimedia companions (for example, complex display/camera modules or graphic accelerators)

• External Memory Interface

Supporting:

- SDRAM

- Cellular RAM

- Burst Flash

- SRAM

- NAND flashes (error correction capability in HW)

• User Interface (Keypad)

Supporting up to 74 keys with multiple key-press capability

• SIM Card interface (USIM)

ISO 7816 compatible

• Analogue Measurement Unit

For various general purpose measurements such as battery voltage, battery, VCXO and

environmental temperature, battery technology, transmission power, offset, on-chip temperature, etc.

Security

S-GOLDradioTM has the following security features:

• Secure Boot and Flash Update

• SHA1 HW acceleration

• Secure Debug

• 128-bit customer defined efuse key

• Anti-intrusion logic.

Audio

Besides the telephony voice CODECs supplied by the Firmware running on the TEAKLite® DSP core,

the ARM926 core enables running high-quality audio CODECs such as MPEG-1/2 Layer-3 Decode

(MP3), AAC+ or AAC++. Audio streaming is supported according to the 3GPP PSS Release 4

standard.

The output of audio and voice codecs can be mixed and routed to the integrated Hi-Fi Stereo

voiceband supporting CD-Quality. Alternatively, the audio can also be sinked to a mono loudspeaker

using the integrated hands-free amplifier.

LGE Internal Use Only

Summary of Contents for KC550




































































































































































Search results

Summary of Contents for KC550

Reviews:

LG KC550, Service Manual, Page: 22 / 183

Search results

Summary of Contents for KC550

Reviews: