LG KC550 Service Manual Download Page 19

Page: 19 / 183

- 20 -

3. TECHNICAL BRIEF

3.2 Main Chip Introduction

3.2.1 General Description

With the latest member of the S-GOLD family, S-GOLDradioTM, Infineon Technologies introduces the

world’s first single-chip solution for feature-rich mobile phones. The EDGE-capable device combines

alldigital and analog functions of the baseband, a quad-band RF transceiver, and the power

management circuitry into a single chip. With an option for memory stacking (“Package on Package”,

JEDEC compliant) the key functions of a mobile phone are now combined into a single device,

providing all the benefits that come from a maximum level of integration. Full software re-use from the

proven Infineon EDGE platform, MP-ELite, enables fast time-to-market using a comprehensive

development kit available to all customers today.

S-GOLDradioTM is tailored to fit the requirements of EDGE-enabled feature phones with a standard

set of multimedia applications such as:

LGE Internal Use Only

Only for training and service purposes

Figure 2 Application View of the S-GOLDradioTM Block Diagram

Summary of Contents for KC550




































































































































































Search results

Summary of Contents for KC550

Reviews:

LG KC550, Service Manual, Page: 19 / 183

Search results

Summary of Contents for KC550

Reviews: