Instructions for the Installer
In case of installation on an empty kitchen unit with doors, a separation
panel must be placed under the hob. Keep a minimum distance of 20 mm
between the bottom of the hob and the surface of the panel, which must be
easily extractable to allow sufficient access for any technical assistance.
7.5 Mounting
Before mounting the device to the unit, lay the provided adhesive
sponge onto the glass surface to separate it from the unit. After
fixing the provided adhesive sponge (B) to the glass, mount
the device to the unit with the mounting brackets (A) provided
with the device itself, as shown in the figure. When fixing the
hob to the cabinet, use only the holes provided, illustrated here.
7.6 Ventilation
Installation of an oven without cooking fan underneath the hob is
forbidden. In any event, if installed above an
oven or a dishwasher, a space of at least 5
cm must be left between the hob and the top
of the appliance installed below.
In addition to this, leave an opening of at
least 4 mm between the top of the front panel
of the built-in oven beneath and the base of
the hob (see figure below)
Do not obstruct the ventilation grille in front of the product in any type of
installation Below are illustrations of two cases (1 and 3) of installation
suitable for correct ventilation and one case (n° 2) of installation to be
avoided
22
Ofrecido por www.electromanuales.com
