LG JW-Q18WUXA1, Owner'S Manual

Page: 12 / 24

12 INSTALLATION
1
Slide the air conditioner into the case.
Reinstall the 2 screws removed earlier
on each side of the case.
2
Stuff the foam around the unit to prevent air
and insects from getting into the room.
3
Before installing the front grille, pull out the
vent control lever located above the unit
control knobs, as shown. (for some models)
CAUTION
● The unit is heavy. Use an assistant to help
lift the unit and set it in place. Lifting and
maneuvering the unit by yourself could
result in injury.
● Hold the unit firmly in place until the window
frame is lowered to meet the top surface of
the unit directly behind the upper guide. If
the unit falls from the window, it could cause
personal injury or property damage
.
Screw
Screw
The Foam
4
Connect the wire harness from the front
grille assembly to the air conditioner.
5
Attach the front grille assembly to the
cabinet by inserting the grille tabs into the
slots on the front of the cabinet. Push the
grille in until it snaps into place.
NOTE
● Carefully guide the vent control lever
through the grille as you push the grille in.
6
Open the air inlet grille and secure the
front grille assembly with 1 screws (L:10 mm)
through the bottom of the front grille.
Installations of the unit into
the Cabinet