LG J10D-SA, Owner'S Manual

Page: 15 / 31

Recording
15
Hookup and
Settings
Lock (Parental Control) Settings
Set Password
1. Select [Set Password] option then press
B
.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit password you
created.
If you have not yet entered a password you are
prompted to do so. Input a 4-digit password and
press ENTER. Enter it again and press ENTER to
verify. If you make a mistake before pressing
ENTER, press
b .
To change the password, select the [Change],
press ENTER and input the old 4-digit password
then press ENTER.
And input the new 4-digit password then press
ENTER. Input it again to verify then press ENTER.
To delete the password, select [Delete] then press
ENTER.
Input the 4-digit password you created and press
ENTER.
If you forget your 4-digit password
If you forget your password, to clear the current
password, follow the procedure below.
1. Display Setup menu then select an 1 level icon.
2. Use the Number buttons to enter the 6-digit
number “210499”.
3. Select [Yes] then press ENTER. The 4-digit
password is cleared. Enter a new password.
Rating
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
1. Select [Rating] option then press B .
2. Follow step 2 as shown “Set Password”.
3. Select a rating using the v / V buttons.
[1] - [8]: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
[No Limit]: If you select [No Limit], parental control
is not active and the disc plays in full.
4. Press ENTER to confirm your rating selection.
Note:
If you set a rating for the unit, all disc scenes with the
same rating or lower are played. Higher rated scenes
are not played unless an alternate scene is available
on the disc. The alternative must have the same rating
or a lower one. If no suitable alternative is found,
playback stops. You must enter the 4-digit password
or change the rating level in order to play the disc.
Area Code
Enter the code of an area whose standards were used
to rate the DVD video disc, referring to the list (See
“Area Codes”, page 28.).
1. Select [Area Code] option then press
B
.
2. Follow step 2 as shown “Set Password”.
3. Select the first character using the
v
/
V
buttons.
4. Shift the cursor using B buttons and select the
second character using
v
/
V
buttons.
5. Press ENTER to confirm your area code selection.
DivX Registration Code
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
information, visit www.divx.com/vod.
1. Select [DivX(R) VOD] option then press B .
2. Press ENTER and the registration code will
appear.
3. Use the registration code to purchase or rent the
videos from Divx® VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto a disc for playback on
this unit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.