
3
Copyrights
Recording equipment should be used only for lawful copying and you are
advised to check carefully what is lawful copying in the area in which you are
making a copy. Copying of copyright material such as films or music is
unlawful unless permitted by a legal exception or consented to by the rights
owner.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only,
unless otherwise authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p
HDD/DVD RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTRE.
Open source software notice
This product includes
Freetype library : copyright © 2003 The FreeType Project (www.freetype.org).
Zlib compression library developed by Jean-loup Gailly and Mark Adler.
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
Doubly Linked List licensed by Artistic license.
You can download this software from http://freshmeat.net/projects/linklist/
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
POWER:
This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING:
This unit is supplied with a BSI 1363 approved 13 amp mains plug,
fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI
or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your home, then the plug
should be removed and a suitable type fitted. Please refer to the wiring
instructions below:
WARNING:
A mains plug removed from the mains lead of this unit must be
destroyed. A mains plug with bared wires is hazardous if inserted in a mains
socket. Do not connect either wire to the earth pin, marked with the letter E
or with the earth symbol
or coloured green or green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the
distribution board.
IMPORTANT:
The wires in this mains lead are coloured in accordance with
the following codes:
- BLUE: NEUTRAL, BROWN: LIVE -
As the colours of the wires in the mains
lead of this unit may not correspond with the coloured marking identifying the
terminals in your plug, proceed as follows: The wire which is coloured blue
must be connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
HR403DAM-P.BGBRLL ENG 7/8/08 2:22 PM Page 3