manualshive.com logo in svg

LG HECTO, Owner'S Manual

Share
Download
LG HECTO Owner'S Manual Download Page 21

21

PREPARATION

Status Indicator

Operation/Status Indicator

Operation/

Status Indicator

Off

Power standby state (Power is off.)

Red

Power standby state

White

Warm stand-by (Power standby state)

White (Brightness 

changes slowly.)

The Laser TV is in the process of turning 

on or off.

Off

In operation

Red (blinking)

High temperature warning

Red (blinking) + 

Purple once (blinking)

The Laser TV has turned off due to the 

high temperature.

Red (blinking) + 

Purple twice (blinking)

There may be a problem inside the 

product, so contact a local service center.

Red (blinking) + 

Purple three times 

(blinking)
White (blinking) + 

Purple once (blinking)
White (blinking) + 

Purple twice (blinking)
White (blinking) + 

Purple three times 

(blinking)

•  If you turn off the power, the Laser TV may not complete the operation in progress 

depending on conditions and the operation/status indicator may turn red (standby 

mode).

NOTE

Summary of Contents for HECTO












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands