Clipcomm, Inc. Confidential
Page 4
4. How to use
4.1. Change Direction
If you want to pull out the headset from your left ear to put it in your right ear or the other way around, pull out
the earpiece from the hole of your headset and reverse the direction of the earpiece and put it back into the
hole of the headset to fit the headset for either side of your ears.
4.2. Charging HBM-550
Please ensure that your new HBM-550 is fully charged before your initial use.
1. Open the charging port cover on the top of the Headset.
2. Plug the charger into the charging port outlet.
3. While charging, the red LED indicator is lit and will remain lit, until the Headset is fully charged.
4. The red LED light is off when the device is fully charged.
5. Charge the Headset for approximately 2 hours or until the red LED is off.
4.3. Low battery warning
The Headset needs to be recharged when
1. You hear a short beeping sound through the Headset’s speaker at 30 second intervals.
2. You see the red LED light flickers.
Always use the charger that comes with the HBM-550 or that is authorized by LG Electronics inc.
Unauthorized chargers are not covered under warranty and may void the HBM-550 warranty.
4.4. Power on
In order to turn the Headset on, press and hold the Call/Power button located in front of the product for at
least 2 seconds.
4.5. Power off
In order to turn the Headset off, press and hold the Call/Power button located in front of the product for at
least 4 seconds.
4.6. Pairing
Before using your Headset for the first time, you must pair it with another Bluetooth device, such as a mobile
phone.
Follow the steps below (for most devices):
1. Place the LG Bluetooth Headset HBM-550 in Pairing Mode.
Check your Headset is turned off.
Press the Call/Power button for at least 5 seconds and make your Headset discoverable.
Red LED light and blue LED light flickers alternately.
