8
9
How to use
ENG
ENG
Voice dialing
- Brie
fl
y press the CALL button to activate “Voice dialing”.
For best results, record the voice dialing tag through your headset.
NOTE: If your handset does not support voice dialing, this action may activate Last
Number Redial.
Last number redial
- Press and hold the CALL button for 1 second to activate “Last number redial”.
The headset will beep and then call the last number dialed.
Ending a call
- Brie
fl
y press the CALL button.
Transferring a call
- While on a call on your handset, brie
fl
y press the CALL button to transfer the audio
to the headset (the headset and handset must be paired).
- To transfer a call from the headset to handset, press and hold the VOLUME UP
button for 3 seconds.
Call waiting
- Answer a second call without hanging up the
fi
rst by pressing the CALL button for
1 second (You will hear a beep). Press the CALL button for 1 second to return to
the original call.
- Brie
fl
y press the CALL button to end the active call or both calls at once. (subject
to handset support)
Call reject
- Activate call reject by pressing the CALL button for 1 second when the handset rings.
* These functions may only be used if your handset supports them.
For further information about using these features, please consult your handset’s
user manual.
Mic mute
- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for
1 second to mute/unmute the mic during conversation.
How to use
Advanced multipoint
The HBM-260 is capable of having two devices connected to the headset at the same
time. This will give you the freedom of using call waiting between calls on both of your
connected phones.
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on page 6).
- Turn off the headset.
- With the power off, press and hold the CALL button on the HBM-260 for 6 seconds to
enter Manual Pairing mode.
- Now, pair and connect the headset with your other Bluetooth-enabled handset.
(This will be your primary handset).
- Once this handset is paired and connected, go back and connect the originally paired
handset to the headset. (This will now be your secondary handset).
* NOTE: When the HBM-260 is connected to two handsets at the same
time(multipoint), the headset calling functions will work with the primary
handset (or handset which made the last outgoing call).
Calling function
- Voice dialing and Last Number Redial features work with the primary handset (or
handset which made the last outgoing call).
- The device which made the last outgoing call will always be set as the primary
handset.
Call waiting
- While speaking on an active call, Press the call button for 1 second to switch to an
incoming call.
- To switch between 2 active calls, Press the call button for 1 second.
- To end both calls brie
fl
y press the call button.
- If both handsets are receiving an incoming call, the headset will default to the primary
device.
Summary of Contents for HBM-260
Page 20: ...MEMO MEMO ...