Connecting
20
C
onnecting
2
Resolution Setting
The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks. You
can change the resolution using [Setup] menu.
1.
Press HOME
(
n
).
2.
Use
A/D
to select the [Setup] and press ENTER
(
b
). The [Setup] menu appears.
3.
Use
W/S
to select [DISPLAY] option then
press
D
to move to the second level.
4.
Use
W/S
to select the [Resolution] option
then press ENTER (
b
) to move to the third level.
5. Use
W/S
to select the desired resolution then
press ENTER (
b
) to confirm your selection.
y
If your TV does not accept the resolution
you have set on the player, you can set
resolution to 480p as follows:
1. Press
B
to open the disc tray.
2 Press
Z
(STOP) for more than 5 seconds.
y
Since several factors affect the resolution of
video output, see “Video Output Resolution”
on page 56.
y
When you set the HDMI Resolution, over
720p is not outputted to Composit Video.
,
Note
Antenna connection
Connect the supplied antenna for listening to the
radio.
Rear of the unit
y
To prevent noise pickup. keep the AM Loop
antenna away from the unit and other
components.
y
After connecting the FM wire antenna, keep
it as horizontal as possible. Be sure to fully
extend the FM wire antenna.
,
Note
