background image

SAFETY PRECAUTIONS

CAUTION

Installation

• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure

to do so may result in product failure.

• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result

in product failure.

• Keep level even when installing the product.

• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not incon-

venience the neighbors. Failure to do so may result in conflict between neighbors.

• When transporting the equipment, there should be at least 2 or more people, or a forklift. It may re-

sult in serious injury.

• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may re-

sult in product failure.

Operation

• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may re-

sult in serious injury.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. It may result in death, fire or electric shock.

• Do not block the inlet or outlet of air flow. It may result in explosion or product failure.

• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water.

Use a smooth cloth. It may result in serious injury or product failure.

• Never touch the metal parts of the air conditioner when you remove the air filter. It may result in se-

rious injury or product failure.

• Do not place any objects on the air conditioner. It may result in product failure.

• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if

necessary.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operat-

ing. It may result in electric shock.

• Do not drink the water drained from the air conditioner. It may result in serious health complications.

• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure

to do so may result in serious injury or product failure.

• Do not mix the batteries for the remote control with other types of batteries or mix new batteries

with used batteries. Failure to do so may result in product failure.

• Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or serious injury.

• Stop using the remote control if there is a battery fluid leak. If your cloth or skin is exposed to the

battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.

• If you swallow the battery fluid from a leak, wash out the inside of your mouth thoroughly and then

consult a doctor. Failure to do so may result in serious health complications.

•  Do not open or close the front panel by force during the front panel moving.

•  Should open front panel after lift down front panel slowly when the product is operating. 

!

5

ENGLISH

Summary of Contents for H09MW


























Reviews: