22
EN
Icemaker ( * )
This is where ice is manually produced and stored.
Making Ice
<Type 1>
1
Hold the handle of ice tray and pull it out.
2
Fill the ice tray with water so that all the cubes
are equally full.
3
Place the ice tray back to its position carefully
not to spill water on the floor.
CAUTION
•
Be careful not to spill water when inserting the
ice tray after filling with water.
<Type 2>
Fill the icetray with water so that all the cubes
are equally full. And place it in the freezer
compartment.
Taking Out Ice
<Type 1>
1
Rotate the ice separation handle on the
icemaker clockwise.
2
Lift the ice storage bin slightly and remove.
<Type 2>
Hold the icetray at its ends and twist gently.
CAUTION
•
If you open and close the freezer door
frequently, it may take longer for water to be
frozen.
•
The time for water to be frozen may vary
according to the season. Until 24 hours after
initial installation, the temperature inside the
appliance may not be stabilized so that it may
take longer for water to be frozen.
•
Make sure to be careful as the edges of the
ejected ice may be sharp.
Summary of Contents for GS-B6263PZ
