INSTALLATION
SELECT A GOOD LOCATION
NEXT
1. Place your refrigerator where it is easy to use.
1. Wipe off all dust accumulated during shipping
and clean your refrigerator thoroughly.
2. Avoid placing the refrigerator near heat
sources, direct sunlight or moisture.
2. Install accessories such as the ice cube box,
evaporating tray cover, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
4. To avoid vibrations, the refrigerator must be
on the same outlet.
level. If necessary, adjust the leveling screw(s)
to compensate for unevenness of the floor.
4. Prior to use, let the refrigerator run for 2-3
To close the doors easily, the front should be
hours. Check the flow of cold air in the freezer
slightly higher than the rear. Leveling screw(s)
compartment to ensure proper cooling has
can be turned easily by tipping the cabinet
taken place.Your refrigerator is now ready for
slightly. Turn the leveling screw(s) clockwise to
use.
raise the refrigerator, counterclockwise to
lower it.
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION, AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
10
3.
Air must circulate properly around your
refrigerator to ensure efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inches (25 cm) or
greater clearance above the refrigerator and 2
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch
(2.5 cm) from the floor, especially if the floor is
carpeted.
