28
PROGRAMMING MODE
7. Special price ending time setup
Entering set up
mode.
You will see LqC1
Button
Display
Press the
High Temp.
button.
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
Press the
Med Temp.
or the
Low Temp.
button until
appears in the display.
Press the
Start
button.
Display previous special price ending time.
Press
Med Temp.(+)
or
Low Temp.(-)
button to select time be-
tween
1
and
24
.
Press the
Start
button.
The machine sets up the special price ending time, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
• OPL/Coin Type – Press “High Temp.” twice.
When setting up a special price period, the ending time must be later than the beginning time.
NOTE
MFL67863711_en_170328.indd 28
2017-03-28 �� 10:12:12
