DirectCD
TM
v2.5b(s)
Installation
10
Connecting
the Interface
Connector
Connecting
the Sound
Card
Replacing the
Computer
Cover
Connect the 40-pin IDE cable to the back of the CD-R/RW Drive,
making sure the coloured (red) stripe on the IDE cable is connected to
pin 1 on the CD-R/RW drive. Pin 1 is closest to the Power Connector.
NOTE
: Generally, the IDE connector is keyed and will only fit one way.
DIGITAL
AUDIO
ANALO
G
AUDIO
INTERF
ACE
POWER
D G
39
40
1
+5
GND
+12
2
C S M
S L A
R G L
Pin1
Red-edge
If the computer is using a sound card, the drive is connected to the sound
card with an audio cable. The supplied analog audio cable fits most sound
cards or one can be purchased at a local computer store.
Refer to the manual for the sound card for detailed
information regarding connection.
DIGITAL
AUDIO
D G
R G L
C S M
S L A
39
40
1
2
+5
GND
+12
ANALOG
AUDIO
INTERFACE
POWER
L
R
DIGITAL
AUDIO
ANALOG
AUDIO
INTER
D G
39
40
C S M
S L A
R G L
marking L-R
Sound card
When the installation of the drive unit is complete, replace the computer
cover
