14
EN
Adjusting the Height of the
Door
If the door of the appliance is not level, adjust the
difference in the height of appliance door using the
following method.
NOTE
•
Because the hinge pin may fall out, do not
adjust the height of the appliance door more
than 5 mm.
[Method1]
*Reference
Keeper nut
Adjustment hinge pin
1
Turn the keeper nut clockwise using the
spanner.
To loosen the nut
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise with
an 8 mm spanner.
Down
Up
3
Fasten the keeper nut by turning it
counterclockwise.
To tighten the nut
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
[Method2]
If the freezer compartment door is lower than
the fridge compartment door
Level the door by inserting flat(-type) driver into
groove of the left height adjusting screw and rotate
it clockwise.
If the freezer compartment door is higher than
the fridge compartment door
Level the door by inserting flat(-type) driver into
groove of the right height adjusting screw and
rotate it clockwise.
